DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Cummins Diesel Specific Topics (http://www.ramforumz.com/forumdisplay.php?f=187)
-   -   Dodge ram 2004.5 hard starting & p206 code underload (http://www.ramforumz.com/showthread.php?t=79103)

jgs300zx 04-04-2011 02:32 AM

Dodge ram 2004.5 hard starting & p206 code underload
 
i just had my 2004.5 dodge ram diesel engine rebuilt AT 98K had a injector #4 crack and leak fuel into my oil while i was towing and seized the engine up.
while i was getting the rebuild done and a slew of new parts put on of which i will not bore you but I had installed a brand new set of 90hp bosch injectors installed at the time of the rebuild.
I am running a banks power pack system that was already on the truck.
I am getting very hard starts and towing load and half to full WOT i am popping p206 code with the truck not towing or underload don't seem to have the code pop except for the first time it popped and i wiped code never came back till i loaded my camper up. also i noticed i am gettting alot more of the diesel sound as well is this just the new injectors? do i really have a bad #6 injector? or just a bad harness connector? also i can't seem to locate the part number for the # 5 & 6 injector anyone know what that number is?

I really don't like the extra diesel sound either very very annoying but i will live with it if it's the way things are with the bigger injectors.

ramvan2500 04-14-2011 10:45 PM

You need a new ECM it sounds like. If your fuel injectors are good and your coming up with a bad fuel injector code the ECM is most certainly trash. Take it to a good dealership and have them take a wack at it.


All times are GMT -4. The time now is 07:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger