||05-29-2011 09:46 PM
replacing left front axel seal
Wondering if anyone has replaced the left front axle seal and how they removed it and reinstalled it. Already have the hub bearing assembly(what a bear that was!) and axle out. :4-dontknow:
||05-30-2011 05:26 PM
Hi, I don't have an answer so, it's time to .........:icon_bump:........... this back to the top!
I realize this is an older thread, but don't do it. I did the passenger side last night. I found out dodge actually reccomends buying two seals. You are gauranteed to screw one up. The next thing they say to do is to pull the center section out. I just pulled the shift fork off an housing off when I did mine. Because the passenger side acutally does come out by going towards the driver side, so Im assuming the driver side would have to go out by being pulled/pushed towards the center section. Here's my recommendation. Pull the axle. Rebuild so you have a dang near brand new axle, or buy another axle you know is good.
100% serious in this entire post.
|All times are GMT -4. The time now is 06:29 AM.
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger