DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LOWERING or STANDARD (http://www.ramforumz.com/forumdisplay.php?f=24)
-   -   4g CC 2wd bell tech after measurements (http://www.ramforumz.com/showthread.php?t=86074)

Lie2me 06-30-2011 08:50 AM

4g CC 2wd bell tech after measurements
 
Anyone have the stock measurements on same truck?

Measurements:
front and rear 34.75" (ground to center of wheel well)
front fender....4.25 clearance at front of tire, 3.25 at rear of tire.
rear fender 3.25 to front of tire, and 4" between back tire and rear fender.
front and rear have appx 3.25 clearance above center of the tire before it would rub the top of the fender well.
bottom of the bumper to ground 17.25"
center of factory receiver hitch to ground 15"
Truck was measured empty bed(w/factory hard flip cover) and a full tank of gas. Factory 20s and wrangler hp's.

http://im1.shutterfly.com/media/47a1...D720/ry%3D480/

916Timmy 06-30-2011 09:33 AM

I'll do mine when I can today and get back to ya...no hitch on mine though! :)

916Timmy 07-04-2011 03:38 PM

Got them finally...sorry for the wait!

Front: Ground to center of wheel well 36.25"
Tire to wheel well 4.5"
Ground to center of license plate holes 24"

Rear: Ground to wheel well 39.25"
Tire to wheel well 7.25"
ground to bottom of bumper 21.75"


All times are GMT -4. The time now is 06:46 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger