DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   5.9L V8 Specific Topics (http://www.ramforumz.com/forumdisplay.php?f=173)
-   -   Ram 2500 4x4 Problems (http://www.ramforumz.com/showthread.php?t=87257)

IvanSunn 07-16-2011 03:28 PM

Ram 2500 4x4 Problems
 
1998 Ram 4x4 Cummins
Will not engage the 4 wheel drive. Vacuum at vacuum shift motor correct. Removed CAD mechanism. Cleaned the shift fork and did not see any apparant binding or damage. The shift motor shaft appears to move correctly when vacuum is applied. It appears that the passenger side drive axle is out of align with the intermediate drive shaft. Using a small pry bar, I raised the passenger side shaft and slide the shift collar over the intermediate shaft. 4x4 then was engaged and all 4 wheels spin.
There appears to be a nose on the inner axle shaft which fits into the end of the outer axle shaft. But when the collar is slide back the 2 shafts do not stay align. The problem I am sure is that the 2 shafts are not staying in alignment. What keeps them aligned? Thanks for any help...

RedRam10 07-18-2011 10:50 PM

Hi, I don't have an answer so, it's time to .........:icon_bump:........... this back to the top!

While you're waiting on the answer, drop by the Newbie Checkin and introduce yourself with a fep photos.


All times are GMT -4. The time now is 12:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger