DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram Performance Mods - Engine - 5.7 HEMI V8 (http://www.ramforumz.com/forumdisplay.php?f=83)
-   -   exhust problem (http://www.ramforumz.com/showthread.php?t=89418)

hutch88 08-12-2011 12:59 PM

exhust problem
 
I have 05 ram 1500.i put set of obx headers with full flow resonters on my truck.so no more cats..i have o2 sencers before and after the resonters.my problem is now check engine lite is on for o2 sencers now .how do I fix with out choping my exhust up to put cats back on kit was made for no cats.any help would be awsome thanks hutch

snrusnak 08-12-2011 01:20 PM

try the spark plug non fouler trick for the O2 sensors after where the cat(s) were. Do not do this to the main two O2 sensors that were on the manifolds. Only the O2 sensors that were after the cat(s).... Here: http://www.ramforumz.com/showthread....ghlight=fouler

Scroll to the end there is pics by cheffred...

hutch88 08-12-2011 02:35 PM

o2 sencers are already installed before and after the resanters also had to make wires longer for the back two o2 sencers.the code is because there are no cats now.dont remmber what the code was wordfor word hookin back up to buddys scaner later

snrusnak 08-12-2011 02:37 PM

Quote:

o2 sencers are already installed before and after the resanters also had to make wires longer for the back two o2 sencers.the code is because there are no cats now.dont remmber what the code was wordfor word hookin back up to buddys scaner later
Right so do the non fouler spacer trick on the rear two sensors. Or are you saying you already tried this? The code is probably P***** "bank 1 sensor 2" and "bank 2 sensor 2"

hutch88 08-12-2011 02:40 PM

dont know what that is what r they

snrusnak 08-12-2011 02:45 PM

click on the link I posted above ^^ scroll to the end of the thread, there are pictures posted by chefred, that's what you need on the two rear O2 sensors.

hutch88 08-12-2011 03:05 PM

cool thanks will let u know

snrusnak 08-22-2011 12:14 PM

hutch, I understand you got your issue resolved, can you post exactly what you did, so I can update another thread I have that pertains to this issue. Mainly I am looking for info on the steel wool part of it... thanks

SS4Luck 08-22-2011 01:29 PM

Hold on, the way I read that he had the fake cat sensors before AND after the resonator, as in, had fake cats in place of the O2s you actually NEED to be in the hear and in the ehxuast stream...

Right??

snrusnak 08-22-2011 01:35 PM

Quote:

Hold on, the way I read that he had the fake cat sensors before AND after the resonator, as in, had fake cats in place of the O2s you actually NEED to be in the hear and in the ehxuast stream...

Right??
________
I think he has long tube headers with upstream O2 sensors, then resonators(fake cats?), then downstream O2 sensors...

The non fouler trick in the downstream sensors should have done the trick for him. I think it didn't work, then he added steel wool in the non fouler and it worked.


All times are GMT -4. The time now is 12:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger