injector seals ? and steering play
was talking to a guy about buyin his 24V its an 01 with 200K on it trans rebuild new ball joints and steering box.
he says the injector seals are seeping and he has the seals to fix it, im wondering how hard of a job it is to do or how much it could possibly run me to have it done by a mechanic.
he also said there is a small amount of play in the steering when you turn right, said it was steering gromits. does that sounds plausable ? how costly of a job does that sound like ?
also has an edge tuner on it, dunno if there good or bad he said that someone told him they arnt good for the truck so he runs is on stock.
I don't have an answer so, it's time to .........:icon_bump:........... this back to the top! If the price is right and you have the skills it might be a good project truck.
As for you Edge tuner, its a upgrade, it simply gives you more hp. Depending on which tuner it is, you can adjust levels on it, like towing, drive, milage, race and extreme. Its a ok tuner, not the best but one of the upper brands.
So yeah sure you can hurt your truck by setting it on the highest level and beating on it, you could go through a trans, your VP pump, ect. But i suggest before you start putting it on upper levels, get your trans built by Goerend suncoast, or any other high performance companys. (Goerend is my fav, had a few for several trucks built by him)
Oh and make sure its not the 53 block, if it is its up to you, i wouldnt throw any upgrades on it then.
its very common for the block to crack on the 53. check you block on the drivers side and see if you see the number 53 stamped into it.
Hope this helped
|All times are GMT -4. The time now is 02:03 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger