DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum (
-   Custom Dodge Ram Performance Mods - Engine - 5.7 HEMI V8 (
-   -   12" Puller/Pusher E Fan Install (

xtremedurb00 10-24-2011 03:50 PM

12" Puller/Pusher E Fan Install
I got this 12" e fan out out of a 94' Ford Thunderbird SC. It was used for the intercooler. After figuring out how to mount it, I decided to put it in front of the tranny cooler.

You can't see it from here but, I had to trim the edge of the shroud to get it to fit over the oil cooler

Power, source and ground wire all ran together

Ground wire for my switch and e fan along with the source wire

Source, ground and power wires ran to the switch through the rubber boot on the driver side firewall

Wires that come through the firewall and ran to the switch

That plastic piece became useful for something
All together it took me about 3 hours to do.

moparornocar72 10-24-2011 04:34 PM

very nice install and thanks for the pics. reps for that.

xtremedurb00 10-24-2011 09:08 PM

Thanks I appreciate it. My next mod is removing the stock clutch fan and putting a Mark VIII fan in place along with an adjustable controller.

moparornocar72 10-24-2011 09:43 PM

that will work out good, how much cooler is the oil temp running now? do u know?

chefred112 10-25-2011 12:28 AM

that's the tranny cooler that the fan is mounted have the tow package cooler as well (more rows than stock cooler)...nice mod cuz the fluid has to stay as cold as possible...

xtremedurb00 10-25-2011 12:54 PM

Moparornocar....haven't been out of town yet. Im going to head out of town today and see how it works.

Chefred...It is...I just went out there and looked. Before I didn't get up underneath of it all the way. The lines clip to the top edge of my oil pan and I just figured it dumped into my oil pan but now I see that they go all the way back to the tranny. Wow...I feel like a dumb @$$. haha. Oh well, it'll still help. Thanks

All times are GMT -4. The time now is 09:28 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © VerticalScope Inc. All rights reserved.