DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LOWERING or STANDARD (http://www.ramforumz.com/forumdisplay.php?f=24)
-   -   lowered pinion angle (http://www.ramforumz.com/showthread.php?t=95467)

gator1922 10-30-2011 03:25 PM

lowered pinion angle
 
I lowered with mcgaughys flip kit and spindles, now i have a shake above 55 mph. think it could be from the pinion angle. has anyone had this problem

erm 10-30-2011 03:27 PM

It could be the angles at each u-joint.

joeAEKDB 11-10-2011 08:31 AM

I had this problem when I lowered my Silverado. I measured the pinion angle, which was at 4 degrees and then found that stock was 1-2 degrees. Bought some 2 degree leaf spring wedges, and it fixed the problem.


All times are GMT -4. The time now is 08:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger