DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   2010 Dodge Ram Forum (http://www.ramforumz.com/forumdisplay.php?f=79)
-   -   Gear change ? (http://www.ramforumz.com/showthread.php?t=95547)

Devildriver82 10-31-2011 03:41 PM

Gear change ?
 
Hey fellas. Im new on here and looking for advice. I have a 2010 ram 2wd hemi reg cab, 20" wheels with 3.21 gears. Im wanting to upgrade. Just wondering if you would go to 3.92 or 4.10 with limited slip. Either way i know its going to be a big jump for me. Maybe what brand you would go with.

Also, i have been told no need for speedo change. Anything else i will have to worry about. I do have a superchip flashpaq as well. Thanks

GTyankee 10-31-2011 04:00 PM

There are a few different sources to check out
look in our Vendors section, you may get the best discount through them
then of coarse you could get it through your dealership

you may want to check out these sites to get more information about the 9.25 rear end

http://www.ringpinion.com/
http://www.motivegear.com/pages/ring...nion_gears.htm
http://www.richmondgear.com/
http://www.drivetrain.com/parts_cata..._pinioins.html

Welcome to the RamforumZ

erm 10-31-2011 04:33 PM

3.92 seems to be the most popular.

rsg1963 10-31-2011 05:52 PM

If I was switching from that ratio, I'd get the 4.10's instead of the 3.92's because I tow often and every little bit helps in that area. These trucks lack in the low-end area IMHO anyway, so it could only help in the city too. Besides, not much difference between the 3.92-4.10's anyway so why not go a bit higher? (numerically)

Gene K 10-31-2011 09:08 PM

3.21's should never have been in these trucks to begin with.

With 17's 3.55 is minimum. With 20's the 3.92 is minimum.

Since you already have a Superchips so you can adjust for different ratios and 20's I would go 4.10. That will be similar to the 3.92 17" combo in rpm.

SteveO 11-01-2011 07:21 PM

This is the best package I have found..

http://moesperformance.com/index.php...r_of_uploads=0

Devildriver82 11-02-2011 03:32 PM

I think i will get the mopar gear set with detroit true trac 3.92 package. One shop told me i will hear alot of noise with motive or richmond gears. Maybe they just dont know what they are doing too. They said they will only use mopar gears in dodges for that reason

TheSatinPumpkin 11-02-2011 03:38 PM

5% parts 95% install imo

moparornocar72 11-02-2011 03:43 PM

Quote:

Originally Posted by kay9 (Post 648313)
5% parts 95% install imo

exactly! perfect advice!

snrusnak 11-02-2011 04:25 PM

I third what kay9 said. I'd get 4.10 over 3.92 if you are going through the expense and trouble of the swap.


All times are GMT -4. The time now is 10:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger