DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Towing (http://www.ramforumz.com/forumdisplay.php?f=191)
-   -   Where's the wiring? (http://www.ramforumz.com/showthread.php?t=96471)

Phillyeaglekgd 11-14-2011 12:24 PM

Where's the wiring?
 
I have an 07 1500 QC. I have my build sheet from Dodge and it shows that I DO have the towing package. I have all the extra coolers up front, tow/haul mode, and the 3.92 gears. When I bought the truck, it did not have a hitch or the 7-pin factory plug-in; it only had the 4-pin connector behind the bumper. I installed a hitch, and I have just been using the 4-pin connector. I guess this really isn't a "problem", it's just been on my mind. Where are the factory wires? Could they have been removed by the previous owner? Why would they do that? Is it worth buying the factory harness (I assume this is possible), or am I just missing something? Thanks for reading and any help is appreciated!

erm 11-14-2011 02:39 PM

A lot of times the "towing package" wiring is encased in a plastic bag and thrown under a seat. This would include the harness adapter and a 7-pin connector. Mine was installed when I got my truck.

Let's see a pic of your back bumper, right around the license plate light area.

Phillyeaglekgd 11-14-2011 11:18 PM

Here we go.http://i988.photobucket.com/albums/a...lekgd/back.jpg

brad12kx 11-14-2011 11:26 PM

WOW :wow: That's the first Ram I have ever seen with no trailer wiring plug beside the license plate. I just assumed that they all had it...with or without the towing package. :4-dontknow:

rambrute 12-02-2011 05:32 PM

my 07 did not have it either i just bought aftermarket. and did my own wiring. works pretty good so far.

Stainless 12-02-2011 07:45 PM

Looks like someone didn't PDI your truck properly when new, cause its missing stuff if its supposed to have it.

GTyankee 12-02-2011 08:39 PM

A lot of the Gen 2 & 3 just came with the 4 pin connector, that just hangs down like yours did or does

You can buy a 4 pin to 7 pin adapter

http://www.etrailer.com/dept-pg-Wiri..._and_Lead.aspx

Video of the installation process
http://www.etrailer.com/tv-wiring-in...dodge-ram.aspx

Have Fun

beermanjoe 12-04-2011 08:09 PM

If your not going to run the extra wires to the rear for a true 7 wire,just use it the way you have been. To pull something with electric brakes. You`ll have to run wires from the cab.

rambrute 12-06-2011 02:13 AM

the wires terminate right behind the front left wheel well. i just ran the wire for the elec. brakes not for the charger i have the wire ran but not hooked up for the charger.


All times are GMT -4. The time now is 02:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger