DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Suspension (http://www.ramforumz.com/forumdisplay.php?f=168)
-   -   Blown Tie Rod End (http://www.ramforumz.com/showthread.php?t=96519)

Remy1500 11-14-2011 09:37 PM

Blown Tie Rod End
 
My 2007 1500 has a blown tie rod end. We've been to both Napa, AND the dealer, both state their part is 1 inch too long compared to our part that was on the truck and that it doesn't match the steering factory assembly number. Truck does have lift, FABTECH. (Truck purchased from dealer; did not lift truck ourselves). Any suggestions on the ORDEAL?!

Mama needs to figure this crap out!! :4-dontknow:

CollateralDamage 11-14-2011 10:01 PM

As Taken from their website
http://www.fabtechmotorsports.com/pr...uct_list&c=224

"Our 6" Basic Systems include steel coilover shock spacers that utilize the stock front coilover shocks for a factory like ride. This system uses our proven IFS technology with extended length ductile iron steering knuckles and arched crossmembers for exceptional suspension ground clearance with a 1/4" thick differential skid plate, impact struts, heavy duty tie rods, and rear add-a-leafs."

Thats if your system is the 6" one but just from no one knowing what your tie rod end it is, i would guess its one that comes with a lift kit. by the looks of it your tie rod end is a fabtech part and you should drop them a line and see if you can get one.

Contact Fabtech

Corporate / Manufacturing Operation Hours
Monday - Thursday
7:00am - 4:00pm

Sales / Tech Support / Shipping / Receiving Hours
Monday - Friday
7:00am - 4:00pm

Toll free:
877-432-2832

Phone:
909-597-7800

Fax:
909-597-7185

Email:
info@fabtechmotorsports.com


All times are GMT -4. The time now is 09:07 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger