DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram - Complete Builds (http://www.ramforumz.com/forumdisplay.php?f=230)
-   -   slammed D350 (http://www.ramforumz.com/showthread.php?t=97019)

jakeryii 11-21-2011 05:24 PM

slammed D350
 
ok ok ill begetting my license here soon and my dad will be giving me his old 86 dodge ram D350 it has 70k on the clock as far as the drive train goes its a la series 5.9 liter 360 v8, 4 speed granny gear manual trans and i think Dana 44 in the rear (plz correct me if im wrong) it was custom ordered from the factory to be put to use on a a farm by the original owner (why it only has 70k) and we are only the second owner the badging says d350 custom so im not going to worry out keeping stock or original so my plans are to lower it by cutting 2 coils out of the front springs and flipping the rear leaf spring mounts, the ditch the old bed its rusted out in the middle were a steel plate has be put in through a hole cut in the bed and bolted to the frame ill be keeping the steel plate in there be cause im going for a hot rod/ utilitarian look so ill be doing a flat wood bed ill post some pics up that i found in a few

jakeryii 11-21-2011 05:30 PM

pic of the beast

http://farm7.staticflickr.com/6033/6...d1999a8fb4.jpg
Image11212011132757 by jakeryii, on Flickr

http://www.************************/...=D250+lowering is were i got my info on lowering the rear

and the front
http://ramchargercentral.com/technic...g1867/#msg1867

more pics

inspiration
http://farm7.staticflickr.com/6036/6...8f8a052831.jpg
inspiration by jakeryii, on Flickr

photochopped

http://farm7.staticflickr.com/6045/6...c797dab221.jpg
lowered and chopped by jakeryii, on Flickr

jakeryii 04-02-2012 05:30 PM

well i popped out the dents and lost my job before i could get it torn apart so it looks like it may be a 2x4 sand rail down in the obx

Chunkem 04-06-2012 10:25 AM

Keep us updated.....


All times are GMT -4. The time now is 03:22 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger