DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LIFTING - Dodge Ram 4x4, 2x4 (http://www.ramforumz.com/forumdisplay.php?f=14)
-   -   2011 Lift Need Help (http://www.ramforumz.com/showthread.php?t=97988)

GO NOLES 12-04-2011 02:51 PM

2011 Lift Need Help
 
Just got a new ram and want to put a lift on it, would love to get some help and see some pics :smileup: thinking 4 inch with 35s do not want to put 37s on thanks

curt4816 12-04-2011 06:29 PM

probably going to need 6in of lift to clear 35's. unless they are skinny.

nfllover911 12-04-2011 07:23 PM

Quote:

Originally Posted by curt4816 (Post 667186)
probably going to need 6in of lift to clear 35's. unless they are skinny.

Aren't you able to fit 35s with a leveling kit? 35s shouldnt be a problem with a 4 in lift I dont think so

Sphincter 12-04-2011 09:14 PM

Here is mine with a 6'' ProComp lift on 35's
http://i106.photobucket.com/albums/m.../Magnaflow.jpg

Laramie Longhorn Kid 12-05-2011 12:37 AM

Mines on a 6" bds suspension lift with a 1 and 3/4" leveling kit on 34" bfg all terrains with 22's. Agreed I don't think you'll fit 35" tires on a 4" but I have an 11" wide tire.

GO NOLES 12-05-2011 06:33 AM

thanks for the info think i will go with a 6 inch

Musclemckeester 12-05-2011 09:52 AM

You can fit 35s with a 4" lift with no problems. I ran a 35.5" tire with just a 2" level for several months with no problems. Depending on the tire width and wheel specs, you may or may not need to run a spacer. To me 35s look a little small on a 6" lift...

mentalreboot 12-05-2011 10:28 AM

are high angle CV's pretty much required for 4+ inches of lift on this chassis?

since i only have 3.55s im thinking of a milder lift with 32-33s tops on 17s.

I like articulation so I was hoping to do it without any spacers.

sweetstang 12-05-2011 02:44 PM

Quote:

Originally Posted by Laramie Longhorn Kid (Post 667456)
Mines on a 6" bds suspension lift with a 1 and 3/4" leveling kit on 34" bfg all terrains with 22's. Agreed I don't think you'll fit 35" tires on a 4" but I have an 11" wide tire.


Off topic but can you post a pic of your truck with 22's and 35's I am looking at going that route but I want to see what it looks like.

Rayne 12-05-2011 05:42 PM

You can run a 35" tire on a 4" lift no problem. Only thing you'll have to watch for is the BS on the wheels that you want to put on.


All times are GMT -4. The time now is 07:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger