DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum (
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LIFTING - Dodge Ram 4x4, 2x4 (
-   -   TRX Lift, are they out there? (

The Rev 12-10-2011 10:42 PM

TRX Lift, are they out there?
So I've searched a bunch of old threads, but couldn't find a definative answer. Is it possible to put a leveling or lift kit on a TRX trimmed 2010?

I'm really just looking for a 2" leveling kit, but after seeing on the Rough Country website that their leveling kit doens't fit TRX's I don't want to end up buying a kit from another company that won't work.

Thanks for any help.

candy08 12-10-2011 10:59 PM

Sure is, you just can't go 2.5". I'd personally look into the Bilstein adjustable struts. All lift kits work with the TRX.

Stangshcky12 12-11-2011 12:02 AM

As far as I know the only difference with the trx I that it sits about 1" higher in the front then other packages. What I don't know is how they get that 1", I think it's a different strut then what's used on other models which would mean you need to be careful if you use a spacer
There wouldn't be any dufference if umyou used the bilstien adjustables

Blackout Ram 12-11-2011 07:26 PM

I would get the bilstiens, the trx sits up an inch higher probably by like a 3/4" spacer. I highly doubt they would use a different strut. Call Readylift or someone, or take the strut out and see if u can remove the spacer. If u can remove it then u can use a spacer but if not don't do a spacer because you will over extend the suspension. A 2.5 spacer is only about 1.5" tall, so if you go with both that will be too much. I would just go with the bilstiens, there not much more expensive then spacers and are better.

candy08 12-12-2011 10:16 PM

Trx models do use a differet strut to achieve it's .7" lift.

Get the Bilstiens, you'll get the most lift and a better ride.

Blackout Ram 12-13-2011 07:55 PM

I stand corrected about the different struts.

The Rev 12-24-2011 03:06 PM

Thanks for the info everyone. I went with your advise and ordered the Bilstiens 5100 series for the front and a set of leveling spacers for the rear. I'll let you know how the install goes.

All times are GMT -4. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © VerticalScope Inc. All rights reserved.