DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (
-   VARARAM - Dodge Ram Performance! (
-   -   Vararam How To Install (

moparornocar72 12-15-2011 04:42 PM

Vararam How To Install
Alright, I had an issue with my paint (fish eye, which is weird considering i wiped it down with wax/grease remover) so I didn't fully install it but mocked it up minus the lid. I am going to hopefully sand it all back down and have it correctly painted tomorrow. :smileup:

Here's a how to install for some of u that will be getting them soon.

Pull this piece out of the box

Attach this piece using the 3 supplied screws that are in a bag with the coupler.

Pull factory Hose off (keep elbow) and install the breather in the elbow (I don't really like this breather but will make some adjustments later.)

Remove the Gap cover that's between the radiator and the front grill (just pulls up) Don't forget to pull off these clips that sit above ur headlights as they are pretty loose with nothing holding them down (and might go bye bye)

Install the coupler to the bottom of the assembly and then slide the assembly onto the throttle body and tighten both clamps down. Attach the IAT sensor in the coupler (just twists in)

Make sure everything is tight and ur ready to tear up the road!

This was my lid before it decided to fish eye. It happens and I will have time to fix it tomorrow maybe.

UltraFlame 12-15-2011 05:59 PM

Great install so far. Looking forward to seeing the rest.

moparornocar72 12-15-2011 06:11 PM

i have work tomorrow then celebrate my birthday since i cant tonight then sat. going to atl to trade some stuff with another member so it may be a few days if i cant get it done tomorrow.

916Timmy 12-15-2011 06:14 PM

Awesome job already! I just got mine out of the box....WOW! Looks great! Can't wait to get it thrown on there!

Here it is unpainted out of the box....smooth lid.

moparornocar72 12-15-2011 06:50 PM

I should have put it on and painted another day but o well!

Btreat003 12-15-2011 08:28 PM

Jealous!!!! I'm liking it already though....

916Timmy 12-15-2011 10:06 PM

How long did it take, I am thinking about going out to do it right now :)

snrusnak 12-15-2011 10:30 PM

Looks like a really cool setup. A question, does the kit require you to run a breather? I really don't like breathers. Otherwise it sure is a slick looking intake and should perform as well as it looks. It looks like the cover over the radiator support remains off? That wouldn't bother me but may bother some...

moparornocar72 12-15-2011 11:26 PM

Yes u might can run it into the catch can line though.

moparornocar72 12-15-2011 11:39 PM

Yes u might can run it into the catch can line though.

All times are GMT -4. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger