DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Heating & Cooling (http://www.ramforumz.com/forumdisplay.php?f=201)
-   -   Interior heater (http://www.ramforumz.com/showthread.php?t=99065)

Bigreddog 12-17-2011 06:37 PM

Interior heater
 
What is the best way to run a power cord into the cab of a 2012 dodge ram to plug in an interior heater

Stump3r 12-17-2011 06:55 PM

Last time I did this mod I cut the end off the power cord then ran it through the firewall and installed a new plug on the cord. Then had a two plug extension cord so the interior heater and block heater were all on the same plug. Worked like a charm. Well until I drove away without unplugging the truck and broke a piece of the grill.

Bigreddog 12-17-2011 08:04 PM

What is the best spot to do this , worried about drilling into something

Stump3r 12-17-2011 10:16 PM

Drivers side, I even thing there maybe an open port there too!

erm 12-17-2011 10:49 PM

Look near your steering column penetration in the firewall. There will be at least one, possibly two, plugs that you can cut or drill through.

Joe7810 02-28-2012 12:52 PM

Wow, I didn't know such a thing existed!


All times are GMT -4. The time now is 01:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger