DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Great Plains (http://www.ramforumz.com/forumdisplay.php?f=98)
-   -   off road lights (http://www.ramforumz.com/showthread.php?t=99071)

jordglynn 12-17-2011 06:50 PM

off road lights
 
Any ideas on how to wire off road lights to my brush guard on my 06 dodge ram 1500?

erm 12-17-2011 10:57 PM

Find some lights with a pedestal mount (bracket with the bolt through the bottom) and when you drill the holes, fish the wires through the tube of the brush guard, then into the truck either between the grill and bumper or under the bumper. Just make sure you protect the wires from rubbing on sharp edges.

Most off road light kits come with a relay, a harness and a switch that goes to your cabin. The relay is directly connected to the battery and you will have a ground, then two or three leads to the switch depending on whether or not the switch lights up.

Holler up if you have more questions.

ucanthngwme 03-27-2012 10:23 PM

If you buy lights that do not come in a kit with all of that stuff, you can pick up a switch kit with relay. Pro Comp has a pretty good kit that is cheap. Easy to install.


All times are GMT -4. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger