DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (
-   Heating & Cooling (
-   -   1995 Ram 2500, 360 (

dannyh 12-17-2011 10:49 PM

1995 Ram 2500, 360
I replaced the water pump and during the replacement I discovered a short coolant hose from the water pump, under the alternator/ a/c compressor mounting bracket. Does anyone know how to remove this bracket so that I can replace this short coolant hose while I've got this tore down? I've remove all the bolts I have seen but the bracket will not move. Any ideas?

panhead 12-18-2011 12:20 AM

I think, the idler pulley has to come out (between the a/c and alt). I'll have to check tomorrow.

dannyh 12-18-2011 01:20 AM

I looked at that that and I could feel behind the pully the bolt does not go all the way through. I can't see anything else hold it but I cannot get it to move. It will rock up and very little but it will not pull straight out or up. Are there any online repair manuals I could looks at?

panhead 12-18-2011 01:26 AM

Its been awhile since I had pulled the acc. Bracket off. Mine came off fairly easy when I did the water pump and plenum plate.

dannyh 12-19-2011 07:46 PM

Yes I had to pull the Idler pully off, there is a bolt behind it that can not be seen unless the Idler pully is off. Thanks for the input.

panhead 12-19-2011 11:26 PM

No problem. Hope everything works out man.

All times are GMT -4. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.10 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger