Thread: A Body Lift
View Single Post
  #10  
Old 02-02-2013, 12:26 PM
Barbarian 69's Avatar
Barbarian 69 Barbarian 69 is offline
Dodge Ram Forum Newcomer
 
Join Date: Jun 2009
Posts: 9
Gender: Male
Vehicle: 2008 Dodge Ram Big Horn QC 4x4
Trim Level: SLT
Color: Electric Blue
Engine: 2003-2008 345ci (5.7L) Hemi V8 345hp 375lb/ft
Rep Power: 0
Rep:12
Barbarian 69 is on a distinguished road
Default

Wow thanks for the complements from everyone.
Sinistersix, as fastNugly mentioned I was able to fit the 37" Nittos on with both the 3" Zone body lift + the 2.5" leveling kit I installed for a total of 5.5” lift. I also have the adjustable Bilstein 5100’s but I left them at the stock height as I already had the leveling kit in. As for comparing the Zone body lift to the PA I read a lot before purchasing and after seeing the extremely beefy bumper brackets that came with the Zone compared to what I saw in the PA kit was why I went with Zone and couldn’t be happier that I did as it was an easy install. fastNugly, I’m not sure what the stock offset on the ’08 wheel is but that’s what these are. One thing that may have helped though is that the Nitto 37” Trail Grapplers are listed at 37x12.50R20LT where most other Mud tires I looked at in a 37” were listed as 37x13.50R20LT so maybe the 1” difference in width helps too?
__________________
2008 Dodge Ram 1500 Bighorn QC 4x4 with the 5.7 Hemi, Zone 3" Body Lift, Bilstein 5100's.
Reply With Quote