Install of the basket was a little more difficult, The basket comes with bars to install with, throw them away, they make the basket sit another 2 inches off the truck and rattle like crazy, make sure you keep all the hardware though.
You may have to adjust the cross bars, me I liked my bar placement so adjusted the attachement holes on the basket. On the rear cross bar remove hte end caps and pull the trim out of the top rail, slide 3 mounts in the rail upside down, if you place small side up the screws dont reach and they sit angled when tightened. Screw the screws into mounts, do not tighten, center your basket, or place where you would like it. Using a sharpie mark the rubber on the front cross bar on the sides of the basket floor so you can trim it also mark the basket mounts in hte middle of the bar so you can drill holes.