DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum - View Single Post - Quad and Fog HID Install Tutorial
View Single Post
Old 04-24-2013, 02:34 PM
Jeff McGuire's Avatar
Jeff McGuire Jeff McGuire is offline
Dodge Ram Forum Newcomer
Join Date: Mar 2013
Location: Katy, Texas
Age: 42
Posts: 24
Gender: Male
Vehicle: 2012 Ram 2500
Trim Level: Lone Star
Color: Black
Engine: 2011-20?? 409ci (6.7L) Cummins Turbo Diesel 350hp 800lb/ft
Rep Power: 0
Jeff McGuire is on a distinguished road

Just did mine the other day and here is what i can add to this thread.
Got all my stuff from DDM. (Used them in the past and liked them) They don't even come from them anymore though. They were drop shipped right from China. The ballast aren't even stamped DDM like their old ones. The mounting brackets are a joke too. Don't waste your money. The screws that come with the brackets pull right through the hole in the ballast. The ballasts have 3 mounting tabs on them so just use those. The bulbs now have the correct plug on them to plug into the existing wiring inside the headlamp now. I was pleased to see that after seeing others in this thread had to just plug the wires into the factory connector and wrap it with tape. I bought the cancelers from them and everything works great. I bought cancelers for the fogs too but didn't even use them after reading on here that I wouldn't need them. They work just fine with out them. Oh and last thing to add. I didn't need to pull my grill either. I used the long extension and it worked fine. When installing that bolt I found there was a large enough opening on top to reach down and hold the bolt to start it. (This could be on the HD truck only, not sure)
Zone 6" Lift, 37" Toyo MT, 20x10 Moto Metal 951, HID's and LED's, Shaved Emblems, & more to come
Reply With Quote