View Single Post
  #2  
Old 05-08-2013, 06:45 AM
gonefishin776's Avatar
gonefishin776 gonefishin776 is offline
Dodge Ram Forum Member

 
Join Date: Jul 2012
Location: Stafford, Virginia
Age: 24
Posts: 5,911
Gender: Male
Vehicle: 2007 Dodge Ram 1500
Trim Level: SLT
Color: Patriot Blue
Engine: 2003-2008 345ci (5.7L) Hemi V8 345hp 375lb/ft
Rep Power: 8
Rep:1900
gonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant future
Default

did a quick search on google, and the general consensus is you have to replace the whole assembly (balljoint/UCA).

but then i just now read another post saying they replaced just the ball joints it seems. But that also appears to be way more difficult to press the ball joints in/out so if you can afford it, just do the assembly I guess.

Good luck and I hope this helps some.

BUMP for someone with more info
__________________
JVC Arsenal KD, Bilstein 5100 adjustables [maxed], aFe Stage 2 Air Intake, Superchips 3865, Husky Floor Mats, Saddleman Camo Seat Covers, Flowmaster 40 Series Muffler SI/DO, 20 % Tint. 35x12.5x17 Federal Couragia M/T, 17x8.5 VTEC Warlord wheels, -12mm offest.

Last edited by gonefishin776; 05-08-2013 at 06:49 AM.
Reply With Quote