View Single Post
  #3  
Old 05-13-2013, 08:47 AM
gmcvb gmcvb is offline
Dodge Ram Forum Newcomer
 
Join Date: Apr 2013
Location: Ontario
Posts: 16
Gender: Male
Vehicle: 2013 Ram 1500
Trim Level: SLT Crew Cab 4x4
Color: White
Engine: 2013-20?? 220ci (3.6L) Pentastar 305hp 269lb/ft
Rep Power: 0
Rep:11
gmcvb is on a distinguished road
Default

Yes and no, once you figured out how to remove it, its a joke.

The grill itself is held in place by 4 screws and 4 plastic push clips in which I just gave it a light tug and they popped right out.

This was the toughest part of the job which isn't tough at all.
So there are 2 (what I call) air dams on the back side of the grill which funnel the air into the centre of the grill. These must be removed first before removing the inserts (I also used these to test out the paint on). The trick here is to unclip the tabs where they are the widest, I can't remember if it's top or bottom, once you remove unclip those tabs the rest is pretty easy. Hopefully you will understand when you pull off the grill. I honestly just pulled gently on the one section (farthest from the narrow tab) and it popped out.

The Inserts are held in place by tabs and gently used a screw driver to unlock them all and the inserts then just fall out.

Putting it back is a joke and takes all of 5mins.
Reply With Quote