View Single Post
  #8  
Old 05-20-2013, 09:23 AM
matrixminded84's Avatar
matrixminded84 matrixminded84 is offline
Dodge Ram Forum Newcomer
 
Join Date: May 2013
Location: Saint petersburg, Florida
Age: 30
Posts: 6
Gender: Male
Vehicle: 2004 Dodge ram quad cab hemi
Color: Silver
Engine: 2003-2008 345ci (5.7L) Hemi V8 345hp 375lb/ft
Rep Power: 0
Rep:10
matrixminded84 is on a distinguished road
Default

Yes, i used factory 5.7 replacement springs from dodge, , i also checked all the coils and plug wires for there correct location. I have 2 mini ground straps, one on each valve cover that were both hooked back up and the main grounds from the computer are hooked back up. It seems like a mechanical miss across all cylinders. Also, the truck ran fine before i put the new springs on. I had a question though, the new springs i got had steel sleeves on them, with a 1" gap. Do they need to be positioned to were the rocker arm sit, to allow the spring to drop lower, or does it not matter? Thank you.

Last edited by matrixminded84; 05-20-2013 at 10:11 AM.
Reply With Quote