Here you go Crow! Pics should give you the idea. Beds pretty dirty....just got back from a fly-fishing trip with my buddies to eastern PA. FYI..I used a hacksaw and cut 2 of the ribs off of the male Elbow that goes through the bed plug to keep it from protruding really far towards the cab. All you need to buy is 2 Elbows and 4 Tube Clamps. After spending as much as you already did on the cover, whats another $5-10. Plus the Elbow will protect your tubes from being pinched if you put stuff in the bed, and both ends will be properly secured so they don't come loose. Hope this helps...let me know if you go this route, and make sure to pass it on to others with BakFlip covers!