Originally Posted by brandonjansen
As the original post says you will be able to fit a 35x12.5 tire with a 2.5" leveling kit. If you are using the stock wheels you will need a 1/4" spacer. If you go with aftermarket wheels 9" wide you will need at least a 0 offset but you can go -12 if you want them to stick out further. Keep in mind the further you push them out the greater chance you have of rubbing on the inner fender.
I'm running a 2.5" level with a 0.75" rear coil spacer and 20x9 -12 offset wheels with 35x12.5's. There's a link to my wheel/tire install thread in my signature below with lots of pictures if you want to take a look at what that set up looks like.
thats pretty much exactly the kind of setup i want, thanks alot for the info.
one thing though, the rough country kit comes with front and back spacers, whereas id have to buy the HBS one for the front and TGC for the back, making it almost $100 more. is the quality of the HBS/TGC much better then the RCX?