Originally Posted by mr.lopar
two heavy coats
Best application tips:
Need to clean it perfectly. Using a solution of 50% rubbing alc and 50% mineral water works well. Dry. Apply a light "dusting coat" and let dry 10-15 minutes. Apply a 2nd light coat. 10 min dry. Then apply about 3 more coats twice as heavy. Allow each to dry about 8-15 minutes between (depends on ambient temps, air flow, spray thickness etc). Just slow your spray rate is all. Will hold up better this way. But it can still tear and peel.
Looks great though! Just next time use this procedure and you will have a better result.
Mods: Tint, Line-X spray in, PD emblems, Weathertech mats, Honeycomb grille, Mopar tow hooks, Magnaflow 18" and Y, Bilstein 5100s @ 2.1" & TGC rear spacer .75", Toyo All terrains 35x12.50x20, 5" black tips, BakFlip tonneau cover, 87mm tb
Next: Gorilla lifetime lug nuts, CAI, Diablo tune.