View Single Post
Old 06-21-2013, 09:49 PM
RobK812 RobK812 is offline
Dodge Ram Forum Newcomer
Join Date: Jun 2013
Location: Fort Lauderdale FL
Age: 43
Posts: 6
Gender: Male
Vehicle: 2013 Ram 1500
Trim Level: Bighorn
Color: Black
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
RobK812 is on a distinguished road

Originally Posted by hemidon View Post
Here you go Crow! Pics should give you the idea. Beds pretty dirty....just got back from a fly-fishing trip with my buddies to eastern PA. FYI..I used a hacksaw and cut 2 of the ribs off of the male Elbow that goes through the bed plug to keep it from protruding really far towards the cab. All you need to buy is 2 Elbows and 4 Tube Clamps. After spending as much as you already did on the cover, whats another $5-10. Plus the Elbow will protect your tubes from being pinched if you put stuff in the bed, and both ends will be properly secured so they don't come loose. Hope this helps...let me know if you go this route, and make sure to pass it on to others with BakFlip covers!

Attachment 36226

Attachment 36227

Attachment 36228

Attachment 36229
Awesome work, it looks really clean. Is the clear tubing 1/2 inch? I think the installers may have cut the tubing too short for me to do this mod and I may have to buy more. Looks way better than the job the pro installers did.
Reply With Quote