View Single Post
Old 06-24-2013, 06:00 AM
galfer galfer is offline
Dodge Ram Forum Senior Member
Join Date: May 2013
Location: brevard
Posts: 193
Gender: Male
Vehicle: 2011 RAM 1500
Trim Level: sport
Color: white
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
galfer is on a distinguished road

Also the digikey link in this post isn't working.. have an update?

Originally Posted by Scotty85 View Post
Here is the headlight switch mod.

Parts Needed:
1 3.2mm x 1.8mm LED from
1 2.2mm x 1.4mm LED from

Remove the vent with the headlight switch in it, then unplug the switch and pop it out of the vent. It just pushes out from the back.

Once you get it out, back at your workplace, remove these screws.

At that point you will see the board, all greased up. Leave it greasy, but be careful not to get it everywhere. Especially where the LEDs are. Take note of the retainer tab.

This is what we're working with. There are 2 different size LEDs in the headlight switch. The main one is just like we used before on the door switches. The smaller one is a 2.2mm x 1.4mm LED.

Same as before, just reverse everything to put it all back together.
Here's a pic of the finished product.

Reply With Quote