Originally Posted by BlackRamHemi
Our local CMR is a Hemi tuning specialist, and on top building custom Hot Rods up to 2000 crank HP
Does a ton of work on the new 5.7, 6.1 and 6.4L Eagle Hemi's
...but wont even take on a new customer until they run a Catch Can for at least a few weeks
to reduce the amount of oil film coating the inside of the intake manifold.
If you ever saw a Hemi with the intake removed, you would be shocked!
...and the amount of oil my BT Catch Can has removed from going back into the intake over the past 2.5 years is quite disturbing.
This is just not Hemi's
I have a Jeep Wrangler (3.6L Penstar) and that thing requires a catch can as well.
I took the TB out too to check and low and behold there was oil. This was only with 800 miles on the odometer