View Single Post
  #3  
Old 07-12-2013, 06:48 PM
kyramfan's Avatar
kyramfan kyramfan is offline
Dodge Ram Forum Newcomer
 
Join Date: Jul 2013
Location: ky
Posts: 5
Gender: Male
Vehicle: 2011 ram 1500 4x4
Trim Level: slt
Color: mineral grey
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:10
kyramfan is on a distinguished road
Default

I did look under the front bumper of a 2013 ram. The frame horn that the bumper bolts to has 4 bolt hole that appear to look like the same bolt pattern on the 2009- 2012 models. But the parts department printed off the 2011 and 2013 model ram sport parts diagram, the grille on the 2013 modem is about 1 inch taller, thats why the front bumpers are thinner in the center of bumper. To make room for the larger grille, and to save weight,or so I've read. Some of the brackets on the parts diagram looked the same on both trucks, and somw were different. Most noticeable differences are front bumper impact absorber and obviously the front bumper cover. I am sure with as many custom truckd out there. Someone out theee had done this or tried to do the conversion. The bowtie guys do front end conversions all the time putting Yukon, and Cadillac front colips on chevy and gmc trucks. Like i said before any information would be greatly appreciated. Thanks for the reply HG.
Reply With Quote