View Single Post
  #9  
Old 07-16-2013, 12:50 PM
usmcz28 usmcz28 is offline
Dodge Ram Forum Senior Member!
 
Join Date: Jun 2013
Location: Rochester, NY
Age: 34
Posts: 79
Gender: Male
Vehicle: 2013 Ram 1500
Trim Level: 1500
Color: Blue
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:10
usmcz28 is on a distinguished road
Default

I have a 2013 and I used a K&N 63 series from a 2012 on mine. YES it does fit and YES the AC line gets in the way a little. All I did was trim the box to acomodate the AC line and then wrapped the AC line in a rubber hose so it didn't continually rub on the intake.

As far as the IAT sensor, you dont need the extension although it is rather nice to have. I simply undid the factory wire loom and the rewrapped the IAT wires and reran them. It works and it's easy enough to do, took me about 20 minutes to do. Although it's not plug and play it is feasible to do with a little work.

I can post pictures up if you want me to and I can even take it apart to show you how I made it fit. Not everything is plug and play on vehicles and some "modifying" may need to be done to get things working form time to time but that's what this hobby is all about.
Reply With Quote