View Single Post
  #2  
Old 07-21-2013, 03:00 PM
Warlock III Warlock III is offline
Banned
 
Join Date: Aug 2010
Location: Earth...DUH!
Posts: 7,870
Gender: Male
Vehicle: 95
Trim Level: Cloaking
Engine: 1994-2001 318ci (5.2L) Magnum V8 220hp
Rep Power: 0
Rep:1776
Warlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant futureWarlock III has a brilliant future
Default

Open the hood and there should be 3-3/4 (21 or 22 mm I forget maybe 7/8) bolts on the mounting bracket to the frame (each side). The nuts have locks on them and shouldn't need to be held. Looking up from the wheel well on the driver's side you'll see an extension bracket that the horn is mounted to. Pull the horn off and drop that bracket. No horn on the pass side but the same thing.

If you're going to remove the bumper from the brackets it's best to do it off the truck because they tend to spin/strip.

Last edited by Warlock III; 07-21-2013 at 03:02 PM.
Reply With Quote