View Single Post
  #2  
Old 07-22-2013, 04:08 PM
gonefishin776's Avatar
gonefishin776 gonefishin776 is offline
Dodge Ram Forum Member

 
Join Date: Jul 2012
Location: Stafford, Virginia
Age: 24
Posts: 5,909
Gender: Male
Vehicle: 2007 Dodge Ram 1500
Trim Level: SLT
Color: Patriot Blue
Engine: 2003-2008 345ci (5.7L) Hemi V8 345hp 375lb/ft
Rep Power: 8
Rep:1900
gonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant futuregonefishin776 has a brilliant future
Default

If you are 4wd, then you need front and rear.

What gears are you currently running?

You'll be happier to make the greater jump. Yes, 4.10s are good for 35"s, but if you are already running 3.92s...then you won't notice a huge difference. So you'd be better going to 4.56 (this is all true for 3rd/4th gen rams..I'm assuming 2nd gen have the same options for rear end ratios).

But if you have say...3.55s then a jump to 4.10 would be good. catch my drift?
__________________
JVC Arsenal KD, Bilstein 5100 adjustables [maxed], aFe Stage 2 Air Intake, Superchips 3865, Husky Floor Mats, Saddleman Camo Seat Covers, Flowmaster 40 Series Muffler SI/DO, 20 % Tint. 35x12.5x17 Federal Couragia M/T, 17x8.5 VTEC Warlord wheels, -12mm offest.
Reply With Quote