View Single Post
  #2  
Old 07-30-2013, 03:20 PM
brandonjansen's Avatar
brandonjansen brandonjansen is offline
Lifted Cummins Fanatic


 
Join Date: Feb 2013
Location: Abbotsford, BC, Canada
Age: 22
Posts: 5,331
Gender: Male
Vehicle: 2012 Dodge Ram 3500 CCSB 4x4
Trim Level: Laramie Limited
Color: Mineral Grey Metallic
Engine: 2011-20?? 409ci (6.7L) Cummins Turbo Diesel 350hp 800lb/ft
Rep Power: 7
Rep:1946
brandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant futurebrandonjansen has a brilliant future
Default

Every vehicle is slightly different from the factory. If you want to know your rake, go out and measure it.... that way you know exactly what your numbers are and what set up is going to work best on your truck.

Measure all 4 fender heights. From there you can find out your rake at stock height and how much rake you'll have after installing the 2.5" level. You'll want to retain at least 0.5" of rake to avoid looking nose high. If you have less that 0.5" of rake after the leveling kit then you can add rear blocks.
__________________

2012 Ram 3500 Laramie Limited Cummins Build Thread
8" BDS Long Arm Lift with Fox 2.0 Shocks | Dual Fox 2.0 Steering Stabilizer | 37x13.5 Toyo MT's | AMP Powersteps & Bedstep | Bakflip G2
EST 500 hp/1268 ft-lbs at FW | H&S MiniMaxx Custom Tuned | 4" Flo Pro Stainless TBE | Sinister EGR Delete | ARP 425 Head Studs | S&B Intake w/ Scoop
Guide to Leveling & Wheel and Tire Sizing for 06+ 4wd Ram 1500's
Reply With Quote