View Single Post
  #2  
Old 09-01-2013, 05:46 PM
Asur Asur is offline
Dodge Ram Forum Senior Member!
 
Join Date: Mar 2012
Posts: 6,850
Gender: Male
Vehicle: .
Rep Power: 14
Rep:4371
Asur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond reputeAsur has a reputation beyond repute
Default

Quote:
Originally Posted by ScoMo View Post
I am not very electrically savvy. Just want to make sure I am doing things the right way the first time. Any help is appreciated. I plan on ordering from Retro Solutions. Cheers
Send sales an email (don't expect a fast response) and tell them the year, model and type of headlamp housing you have (i.e. Dual, Quad or projectors) If you want the best light output go with the low beams at 5k color, 55watt ballast's and bulb, as for the fogs, I am not sure you can use 55 watters in there would be something to ask them, I read mostly 35's was good enough for the fogs as the housing is smaller and more concentrated, get the same color for the fogs also, 5k is the best light output, as you go higher your going to get the more blue look but your output will diminish slightly for every 1k color added. so send them this info they will get you a list of all the parts you need, I myself still believe the use of the wire harness for your truck year and model will benefit you more than going the canbus way. Once you have info back from them, look at there FAQ's you will find lots of info on the installation of these kits, also this section is filled with information, you can also ask specific questions that others can get you info. Hope this helps.
Reply With Quote