View Single Post
Old 09-03-2013, 12:32 AM
CaptainCurseD9H's Avatar
CaptainCurseD9H CaptainCurseD9H is offline
Dodge Ram Forum Junior Member
Join Date: Aug 2011
Location: Canada
Posts: 36
Gender: Male
Vehicle: 2011 Dodge Ram Sport
Trim Level: Sport Crew Cab
Color: Charcoal
Rep Power: 0
CaptainCurseD9H is on a distinguished road

Originally Posted by BuckWild09 View Post
here are pics at full lock, angles and front diff
First as i see your CV angle are too high and the rear diff angle not top notch, many guys running RCX lift have diff drop bracket problem , seem that RCX didnt put the right bracket in the kit thats causing vibration in low speed..Second , put the truck into a good 4X4 shop and do a proper alignment is very important or you gonna have handling issue, and i mean a GOOD shop,my truck has pass two alignment and its still not good, has for the coil hitting the spindle well im learning toward not the good spindle for the kit or something installed wrong?

You running Bilstein 5100 on wich setup?? 2.1-2.8??Because not all lift kit work with bilstein shock , if the lift kit is putting angle and you add leveling shock your over extending your front end and too much angle!I Know that BDS lift and other are working with bilstein in 2.1-2.8 but they primaly put stock angle on front end but i dont know if RCX can work with them at max setting...

Last edited by CaptainCurseD9H; 09-03-2013 at 01:33 AM.
Reply With Quote