Originally Posted by ScoMo
I had emailed them in regards to buying hid's for my heads and fogs, asking what I would need exactly. I told him that it was the 2013 with factory projectors. I didn't think that two separate kits had to be purchased for low/high beams, but he says otherwise. Also I've heard you shouldn't run 55w in the fogs. Does anyone else have experience with these guys or have ordered exactly what I am looking at and can help out with a parts list?
Thank you for that clarification! Here are the links and selections for what you will need for your particular vehicle application:
35w DIGITAL headlight kits:
55w DIGITAL headlight kits (30%-40% more output):
Please select "9012/HIR2
" for low beams, the color of your choice (see below) and for vehicle application, "Dodge Ram 2013+
." No bulb capping is required for this application.
For the high beams, the same item will also need to be added to your cart again as a second item, however with the "9005/HB3
" bulb selection instead.
35w DIGITAL fog lights:
55w DIGITAL fog lights (30%-40% more output):
Please select "9006/HB4
" for fitment, the color of your choice, and "Dodge Ram 2013+
" for application. Here we would suggest the bulb capping service as the factory fog lamp housings do not have built in bulb covers.
The list of information you have been given is correct. You have 3 sets of lights on this truck, low beam's, high beam's and fog lights, each set requires 2 bulbs, 2 ballasts, and 1 wire harness, so in the end you need 3 kits. The fog lights you can if you wish go without a harness, I have seen other members set them up without, but I would myself still go with a wire harness, HID upon lighting draw a good amount of amperes, once on they use up less for the amount of light output, 55watt for the lows is sweet, Fogs I would go 35, but seems from the info they gave you 55 is also possible. As for the high beams, I would leave them stock. Thats just me. Hope this helps