View Single Post
  #3  
Old 09-06-2013, 08:15 PM
NWRQC's Avatar
NWRQC NWRQC is offline
Dodge Ram Forum Senior Member
 
Join Date: Dec 2011
Location: W.A
Posts: 643
Gender: Male
Vehicle: 2007 RAM
Engine: 2007-2011 409ci (6.7L) Cummins Turbo Diesel 350hp 650lb/ft
Rep Power: 0
Rep:64
NWRQC will become famous soon enough
Default

Quote:
Originally Posted by gonefishin776 View Post
not terribly familiar with the 2nd gens but the concept is really the same. I'm assuming the stock offset is like the 3rd/4th gens: +19mm. so if he gets a -12mm, -24mm offset he should get a good stance. now...i'm not sure if he'll need a level on the front to prevent some rubbing with an offset wheel.
I'm not familiar either, but I did try doing a little research earlier while at work. I couldn't find 2000 16" wheel specs specifically, but years around it. It looks like a 7.5" rim with a 13.5mm offset.....could be completely wrong on this....

So before going forward with accurate or inaccurate info we need to know the wheel width and diameter of what he's wanting before offering up an offset to accomplish his goal.
A -12 offset on an 8" wide wheel will fit a lot differently than a -12 offset on a 10" wide wheel.
__________________
2007 6.7 | EFI-Live | Draconian tuned TCM | T4 S366 | ARP | AFE | Thuren | Carli
Reply With Quote