View Single Post
  #1  
Old 09-25-2013, 02:26 AM
zorro15's Avatar
zorro15 zorro15 is offline
Dodge Ram Forum Newcomer
 
Join Date: Aug 2013
Location: Bavaria , Germany
Age: 56
Posts: 13
Gender: Male
Vehicle: 2004 Dodge Ram 1500 Quad Cab
Trim Level: SLT
Color: Red
Engine: 2002-2007 287ci (4.7L) PowerTech V8 235hp 295lb/ft
Rep Power: 0
Rep:10
zorro15 is on a distinguished road
Post Cylinder 6 Misfire

Hi,Not sure if i'm right here; if not please push!
Since a couple of days ago my Ram has been throwing out a cylinder 6 misfire. Not quite sure what causes the problem.But first i would like to explain what happend.
I was driving home at about 55-60 mph and all was fine, then going uphill on the highway the MIL came on and went back off.After a short while it came back on and stayed.The truck seemed to lose power and started to run rough. So on the next day i read out the codes.P0300,P0305,P0306.
and deleted them.Truck still ran rough. And the code P0306 came back up, so i changed the Coil on cyl. 6 and now it still idles rough and shakes but the code is gone.Also disconnected the battery for a short while to reset the DME.Now i have a new issue. It starts blowing blue smoke on start and when i accel heavy.
Have no idea what the problem could be and hope for some hints.
Thnx.
Zorro15
__________________
IF YOU CAN'T DODGE IT RAM IT

Last edited by zorro15; 09-25-2013 at 02:33 AM. Reason: Wrong capital
Reply With Quote
Sponsored links