View Single Post
  #2  
Old 11-22-2013, 07:16 AM
TransEngineer TransEngineer is offline
Dodge Ram Forum Senior Member!
 
Join Date: Nov 2011
Location: Grass Lake, MI
Posts: 1,082
Gender: Male
Vehicle: N/A
Rep Power: 3
Rep:338
TransEngineer is a jewel in the roughTransEngineer is a jewel in the roughTransEngineer is a jewel in the roughTransEngineer is a jewel in the rough
Default

In 2011, we eliminated the OD solenoid from the trans solenoid module (which is inside the trans; it is part of the valve body assy). We now use the MS solenoid to control the OD clutch.

Your 2010 truck's PCM is still expecting it to have an OD solenoid. Since there is none there anymore (in the 2012 trans you installed), you get the P0760 OD Solenoid Circuit fault.

So you need to get a 2010-style solenoid, and install it into your trans. You could pull the old one out of your old trans I suppose. The 2010-style solenoid module has a white wiring connector on top of it, whereas the 2011+ style solenoid has a gray wiring connec tor. Swap the solenoid and you should be OK.
Reply With Quote