View Single Post
  #5  
Old 11-22-2013, 09:05 AM
adventurer's Avatar
adventurer adventurer is offline
Dodge Ram Forum Senior Member!
 
Join Date: Jan 2011
Location: Amman-Jordan
Posts: 173
Gender: Male
Vehicle: 2010 Ram and 2006 Ram Hemi
Trim Level: 4x4 SLT and4X4 SPORT
Color: Silver , Flame Red
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:10
adventurer is on a distinguished road
Send a message via Skype™ to adventurer
Default

Quote:
Originally Posted by TransEngineer View Post
I'm assuming those are related to the OD solenoid "disappearance," but hard to say. I would expect P0760 to set first, but obviously if the PCM turns on the (non-existant) OD solenoid (to check the OD pressure switch) then the pressure switch won't respond either, so that may explain the P0871. P0882 means there was no 12V power feed from the trans relay, but that is normal if you're in limp-in (and P0760 or P0871 will put you into limp-in), so that may also be related.

In any event, you definitely need to change to a 2010-style solenoid module, so do that first, and see if it fixes everything. If you still have the other faults after replacing the solenoid, post again and we'll take it from there...
Ok i ll do that tomorrow and i ll post the result as soon as i return the old valve body
__________________
2010- S&B CAI/87MM TB/HKS TB GW/OIL FILTER BREATHER/Y PIPE/PYPES VIOLATOR MUFFLER/HEMIFEVER TUNE.
06- MAGNAFLOW CAT-BACK/Y PIPE/TB SPACER/HKS-TB GW/MOPAR CAI/SUPERCHIPS/OIL BREATHER FILTER/JET 180 TSTAT/3.92 LSD


Reply With Quote