View Single Post
  #4  
Old 12-28-2009, 04:07 PM
RamTech's Avatar
RamTech RamTech is offline
Dodge Ram Forum Senior Member!

 
Join Date: Nov 2009
Location: Johnson City, TN
Age: 44
Posts: 12,120
Gender: Male
Vehicle: 2004 Dakota Club Cab 4X4
Trim Level: SXT
Color: Bright Silver
Engine: 2002-2008 226ci (3.7L) Magnum/PowerTech V6 215hp 235lb/ft
Rep Power: 15
Rep:1824
RamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant future
Default

16.Remove the two bolts (1) that secure the instrument panel to the center of the floor panel.


<A xmlns="http://www.w3.org/1999/xhtml"> 17.Remove the right cowl trim cover.18.Disconnect the two instrument panel wire harness connectors from the two body wire harness connectors (1) located on the right side of the cowl panel (2).


<A xmlns="http://www.w3.org/1999/xhtml"> 19.Disconnect the antenna coaxial cable connector (1) from the radio coaxial cable connector (2) located on the right side of the cowl panel.


<A xmlns="http://www.w3.org/1999/xhtml"> 20.Remove the one bolt (2) that secures the instrument panel (3) to the HVAC housing (1) below the glove box opening (4).


<A xmlns="http://www.w3.org/1999/xhtml"> 21.Remove the right A-pillar trim.


<A xmlns="http://www.w3.org/1999/xhtml"> 22.Using a trim stick C-4755 or equivalent, from the notch on the bottom, remove the right instrument panel side cover (1) from the instrument panel.


<A xmlns="http://www.w3.org/1999/xhtml"> 23.Remove the three bolts (1) that secure the right side instrument panel bracket to the dash panel.


<A xmlns="http://www.w3.org/1999/xhtml"> 24.Remove the four screws (2) that secure the instrument panel (5) to the top of the cowl panel (1).25.Remove the two bolts (4) that secure the instrument panel to the top of the cowl panel.26.Pull back the driver's side carpet as necessary to pull the air bag module harness out from under the carpet.27.With the help of an assistant, lift the instrument panel up and off of the cowl panel and remove the instrument panel from the vehicle.28.If required, remove the four plastic screws inserts (3) from the top of the cowl panel.

Reply With Quote