View Single Post
  #2  
Old 12-29-2009, 01:25 PM
RamTech's Avatar
RamTech RamTech is offline
Dodge Ram Forum Senior Member!

 
Join Date: Nov 2009
Location: Johnson City, TN
Age: 43
Posts: 12,120
Gender: Male
Vehicle: 2004 Dakota Club Cab 4X4
Trim Level: SXT
Color: Bright Silver
Engine: 2002-2008 226ci (3.7L) Magnum/PowerTech V6 215hp 235lb/ft
Rep Power: 14
Rep:1824
RamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant future
Default

<A xmlns="http://www.w3.org/1999/xhtml">























1.Recover the refrigerant system (Refer to 24 - Heating and Air Conditioning/Plumbing - Standard Procedure) .2.Remove the secondary retaining clip from the spring-lock type refrigerant line coupler.3.Fit the proper size A/C Line Disconnect Tool 7193 or equivalent over the coupler cage (1).4.Close the two halves of the A/C Line Disconnect Tool 7193 or equivalent around the coupler (2).

NOTE: The garter spring may not release if the A/C Line Disconnect Tool 7193 is not squarely inserted into the coupler cage opening. 5.Push the A/C Line Disconnect Tool 7193 or equivalent into the open side of the coupler cage to expand the garter spring (3). Once the garter spring is expanded, pull on the refrigerant line attached to the female half of the coupler until the flange on the female fitting is separated from the garter spring and cage on the male fitting.6.Open and remove the A/C Line Disconnect Tool 7193 or equivalent from the refrigerant line coupler (4).
Reply With Quote