DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum - View Single Post - new waterpump, new stat, still overheating
View Single Post
  #4  
Old 01-20-2014, 11:31 AM
iveyusmc iveyusmc is offline
Dodge Ram Forum Member

 
Join Date: Sep 2013
Location: Austin TX
Posts: 70
Gender: Male
Vehicle: 2017 Ram 1500 sport 4WD
Trim Level: Sport midnight editi
Color: White
Engine: 2013-20?? 345ci (5.7L) Hemi V8 395hp 410lb/ft
Rep Power: 0
Rep:12
iveyusmc is on a distinguished road
Default

replace the cap if it's still overheating there might be air in the coolant system. With engine COLD jack up the front of the truck and take the cap off. Start it let it come up to temp. I squeze the upper hose from time to time to make sure there is no air bubbles. I did this after I replaced my waterpump, t-stat, cap and new fluid. Never had a problem since. The only other thing I can think of is the t-stat from what im told the little round piece the rattles that's almost on the outside (sorry I don't know the name) needs to be on top in the 12 oclock position for whatever reason. Let me know if any of this helps and good luck!
__________________
Semper Fi!
Reply With Quote