View Single Post
  #298  
Old 04-06-2014, 10:08 AM
pinebeatle's Avatar
pinebeatle pinebeatle is offline
Dodge Ram Forum Senior Member!
 
Join Date: Mar 2014
Location: Northern British Columbia
Posts: 128
Gender: Male
Vehicle: 2014 ram 1500
Trim Level: SXT ++++
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:10
pinebeatle is on a distinguished road
Default

For the 2013 and 2014 its going to be a little more expensive. You have to flash it yourself as the person who sold it to you cant do it anymore. something to do with new electronics for those years Quote The DBALL Key2Go Firmware flashing process is a 2-stage process and must be done at the vehicle. (Previously, for the 2006-2012 Dodge RAM vehicles, the DBALL could be flashed ahead of time with the 401.chrysler v5.06 firmware and then the DBALL just needed to be plugging into the vehicle. This procedure no longer works on the 2013 / 2014 Dodge RAM vehicles because Chrysler made significant changes to the electronics on the 2013 vehicles. Therefore to accomplish DBALL remote starting with your factory remotes, the DBALL now needs to be flashed / programmed at the vehicle, rather than ahead of time.) An XKLoader2 Gen2 Programming Tool (Flashtool) will be needed with access to a Computer to do the DBALL flashing) $ 169 on E-Bay so for me up here in Canada ita gonna be over $200 bucks.
__________________
Drinking Rum before Noon makes you A Pirate , Not a Alcoholic

Last edited by pinebeatle; 04-06-2014 at 10:10 AM.
Reply With Quote