View Single Post
Old 05-13-2014, 09:25 AM
HammerHead's Avatar
HammerHead HammerHead is offline
USMC 0313

Join Date: Apr 2014
Location: GEORGIA
Posts: 942
Gender: Male
Vehicle: 2013 RCSB
Trim Level: Express
Engine: 2013-20?? 345ci (5.7L) Hemi V8 395hp 410lb/ft
Rep Power: 0
HammerHead is on a distinguished road

Originally Posted by RootBeer View Post
This is direct from the chat with the Ram Hemi Engineers.

To disable the MDS, put your shifter from D to 5 (as displayed on the EVIC or cluster). With the console shifter, this is just one hit to the left. With the column shifter you need to push the +- button - one time.

Your trans will still shift up and down automatically through all the gears.

Tow/haul button is not the correct method.
My 2013 Ram was a little different. I have the column shifter and if I put it into drive and push the + button it does nothing; I have to push the - button and it will go into 1st gear, then press the + button to cycle it through the rears from 1-6. I usually leave it in 4th or 5th and this seems to work. If this is wrong please advice.
thank again for the good info
Geared and Tuned (Greene Racing Motivation) 14.0@96
Proud member of the 4 second club...
Reply With Quote