View Single Post
Old 06-08-2010, 12:35 PM
sowardcustoms's Avatar
sowardcustoms sowardcustoms is offline
Dodge Ram Forum Senior Member
Join Date: Jan 2010
Location: Burleson,TX
Age: 40
Posts: 490
Gender: Male
Vehicle: 2013 Ram R/T
Trim Level: R/T
Color: Gray
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 7
sowardcustoms will become famous soon enoughsowardcustoms will become famous soon enough

Originally Posted by dev1 View Post
Hello I have been looking through all the forums, and have not seen this problem before.

I had my 2010 Ram R/T Lowered in our shop, using the Mcgaughy' s 2/4 Deluxe kit. the spindles seemed to push out both front tires past the body. this was fixed a little after the alignment.
But today I finally got my 22" wheels, and installed them. They are 285/45/22tires on the 9.5" wide rims with the factory back spacing, but now the drivers side front tire sticks out from the body by about 1/2", but and the passenger side sticks out 1 1/4", I thought they sent me one wrong wheel, but we measured and all the rims are the same.

so I am wondering if anybody has had this happen to them?
Yes the front spindles do push them out mine did the same thing wished I would have went with springs instead of spindles as far as the difference in right and left sounds like one has more camber than the other....
Reply With Quote