View Single Post
  #10  
Old 06-10-2010, 03:12 PM
09 RT RAM's Avatar
09 RT RAM 09 RT RAM is offline
Dodge Ram Forum Senior Member!
 
Join Date: May 2009
Location: DENTON, TEXAS
Posts: 304
Gender: Male
Rep Power: 0
Rep:39
09 RT RAM is on a distinguished road
Talking

Quote:
Originally Posted by dev1 View Post
Hello I have been looking through all the forums, and have not seen this problem before.

I had my 2010 Ram R/T Lowered in our shop, using the Mcgaughy' s 2/4 Deluxe kit. the spindles seemed to push out both front tires past the body. this was fixed a little after the alignment.
But today I finally got my 22" wheels, and installed them. They are 285/45/22tires on the 9.5" wide rims with the factory back spacing, but now the drivers side front tire sticks out from the body by about 1/2", but and the passenger side sticks out 1 1/4", I thought they sent me one wrong wheel, but we measured and all the rims are the same.

so I am wondering if anybody has had this happen to them?

Dev1, there are numerous posts on this issue (McG drop spindles) in the various forums. I will have to take a pic on mine this evening.... but the tires stick out on all 4 past the body stock OEM!!! I am not happy with what I am hearing about the drop spindles....hence they sit in the box on the garage floor. I might go GroundForce. Not much choice with turn key suspension systems. The aftermarket is LAME. Where is Eibach and the rest of the aftermarket??? Thank you for the photos and trying to sort these issues out.

Last edited by 09 RT RAM; 06-10-2010 at 03:16 PM.
Reply With Quote