View Single Post
  #2  
Old 08-21-2010, 12:42 PM
RamTech's Avatar
RamTech RamTech is offline
Dodge Ram Forum Senior Member!

 
Join Date: Nov 2009
Location: Johnson City, TN
Age: 44
Posts: 12,120
Gender: Male
Vehicle: 2004 Dakota Club Cab 4X4
Trim Level: SXT
Color: Bright Silver
Engine: 2002-2008 226ci (3.7L) Magnum/PowerTech V6 215hp 235lb/ft
Rep Power: 15
Rep:1824
RamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant futureRamTech has a brilliant future
Default

CARGO DOOR TRIM PANEL

REMOVAL
  1. Remove the screws attaching the cargo door pull cup to the cargo door.
  2. Remove the screw attaching the inside release handle to the cargo door NOTE: The cargo door trim panel is secured to the cargo door with spring clips and push-in fasteners
  3. Using a trim panel removal tool, remove the push-in fasteners attaching the trim panel to the cargo door.
  4. Pull the trim panel outward to disengage the spring clips.
  5. Separate the trim panel from the cargo door.
  6. Disengage the cargo door release cable from the inside release handle Cargo Door Release Cable
INSTALLATION
  1. Engage the cargo door release cable to the inside release handle.
  2. Position the trim panel on the cargo door.
  3. Align all fasteners and starting at the top of the panel, push into place to secure.
  4. Install the screw attaching the inside release handle to the cargo door.
  5. Install the screws attaching the cargo door pull cup to the cargo door.
Reply With Quote